Adhesive
Brokers Ltd
10 Lowlands Crescent
Great Kingshill Bucks
HP15 6EG
Tel: 08458386873
Fax: 08443104873
Technical Line: 07930567361
Master-Cast™
Master-Cast™
DE025 Re-Enterable Encapsulant
- DE025 reacts with Part B to form a 60 Shore A polyurethane. The product exhibits very low shrinkage during cure and the fully cured material can be readily broken and removed.
- DE025 has been formulated for use primarily as an electronic encapsulant where the possibility of re-work of the electronic components may be necessary. As such DE025 cures to form a weak and easily penetrated product, and can therefore be removed from the electronic assembly if required. In addition the very low viscosity of the mixed system enables the product to penetrate narrow gaps and crevices ensuring complete encapsulation, and subsequent air release.
- Gel Time (100g at 20°C) 5-15 Minutes
- Hardness a full cure 55-65 shore A.
- Moulds should be clean and dry and generally a good quality release agent should be used and allowed to dry fully.
- This material will cure satisfactorily at ambient temperatures. Whilst the material can be demoulded with care after 2 hours, full hardness will develop after 3-4 hours.
Disclaimer
Adhesive Brokers Limited do not accept and liability for loss or damage arising
directly or indirectly from the use of these products. Customers should satisfy
themselves by appropriate trials that each product is suitable for its intended
use.
For more information see data sheet
