Adhesive
Brokers Ltd
10 Lowlands Crescent
Great Kingshill Bucks
HP15 6EG
Tel: 08458386873
Fax: 08443104873
Technical Line: 07930567361
Gel-Cast™
Gel-Cast™ Cartridgeable
Polyurethane Elastomers
- The Gel-Cast™ Cartridgeable Polyurethane Elastomers react to form clear, flexible polyurethane elastomers of hardnesses from 5 through to 30 Shore A.
- Gel-Cast™ Cartridgeable PU elastomers have been formulated for casting components with a soft “feel”, and also for applications where a soft product is necessary such as handgrips, seals and encapsulants. These products also find application as synthetic skin effect compounds and pad materials in equine applications.
- None of the components require preparation other than mixing prior to removal of any product from the containers. The components may be mixed and cast at room temperature and require no pre-warming prior to use.
- Moulds should be clean and dry and generally a good quality release agent should be used and allowed to dry fully. Moulds should require no pre-warming, though if ambient conditions are particularly cold then warming to a temperature of 15-25°C will assist the cure of the material and avoid differential shrinkage between the core and the edges of the moulding.
Disclaimer
Adhesive Brokers Limited do not accept and liability for loss or damage arising
directly or indirectly from the use of these products. Customers should satisfy
themselves by appropriate trials that each product is suitable for its intended
use.
For more information see data sheet
